ÌìÃÀÓ°Ôº

Program Mission, Goals, and Outcomes

Program Mission

To provide entry-level professional skills in the art and science of surgical technology, emphasizing background for professional growth and development, exposure to various surgical specialties, and organization of departments concerning the entire complex of a healthcare facility.

Surgical technologists work under medical supervision to ensure that they conduct procedures under conditions that maximize patient safety by maintaining aseptic technique, proper functioning of equipment, and a safe environment. A surgical technologist is a respected and integral part of the medical practitioners’ team, providing surgical care to patients in various settings.

Program Goals

Program Outcomes

1. Successful completion of all preoperative competencies.
2. Successful completion of all intra-operative competencies.
3. Successful completion of all post-operative competencies.
4. Successful completion of all professional skills competencies.

Click here for a detailed list of program outcomes.

Accreditation Status

Our Commission on Accreditation of Allied Health Education Programs (CAAHEP)-accredited program can be completed in as few as 18 months. Best of all, all surgical technology students must take The National Board of Surgical Technology and Surgical Assisting (NBSTSA) Certified Surgical Technologist (CST) examination before graduation.

All surgical technology students must take The National Board of Surgical Technology and Surgical Assisting (NBSTSA) Certified Surgical Technologist examination before graduation. As reported in the 2024 Annual Report, during the timeframe of 8/1/2022 – 7/31/2023 the pass rate for first-time candidates of the ST program was 100%.

The CST is widely recognized as the foremost credential for surgical technologists in the country and is required for many positions in the field.

The ÌìÃÀÓ°Ôº Institute of Technology Associate in Science in Surgical Technology program of study is accredited by the Commission on Accreditation of AlliedÌýHealth Education Programs () upon the recommendation of the Accrediting Review Council on Education in Surgical Technology and SurgicalÌýAssisting.

Commission on Accreditation of Allied Health Education Programs (CAAHEP)
9355 113^th St N #7709
Seminole, FL 33775
Telephone (727) 210-2350

In accordance with the 2019 Reauthorization of the Higher Education Act, the ÌìÃÀÓ°Ôº Institute of Technology hereby discloses only that the curriculum for this program meets the educational requirements for licensure as Surgical Technologists in the State of Rhode Island. The applicable licensing board in Rhode Island may impose additional requirements on candidates before granting a license. We encourage you to investigate those requirements. ÌìÃÀÓ°Ôº has not determined whether the curriculum for this program meets the educational requirements for licensure in any other states or territories, and we encourage you to investigate the requirements in your state or territory before accepting an offer of admission at ÌìÃÀÓ°Ôº.

±··¡±õ°ÕÌýCourse Catalog

ÌìÃÀÓ°Ôº is proud to offer a modern, practical, immersive curriculum for our unique degree programs. Our career-focused education brings learning to life!

The offered as part of our surgical tech program include anatomy and physiology, math for life science, introduction to allied health, surgical procedures, pharmacology, and more.

Want to learn more about clinical rotations? Review the Association of Surgical Technologists Core Curriculum for Surgical Technology, 7th edition, Surgical Rotation Case Requirements.

Q&A and Technical Standards

Questions & Answers

1. When do my classes meet? Day Classes: Technical classes normally meet for at least three hours a day for up to five days a week. Classes normally begin in the early morning (7:45 a.m.), late morning (usually 11:25 a.m.), or mid-afternoon. The time slot for your program may vary from term to term. In addition, to achieve your associate degree, you will take a total of approximately eight liberal arts courses, which will be scheduled around your technical schedule over the course of your entire program. Each liberal arts course meets approximately four hours per week. Liberal arts courses are offered on days, evenings, and Saturdays. At the beginning of each term, you will receive a detailed schedule giving the exact time and location of all your classes. The College requires that all students be prepared to take classes and receive services at any of ÌìÃÀӰԺ’s locations where the appropriate classes and services are offered. When a regularly scheduled class falls on a day that is an ÌìÃÀÓ°Ôº observed holiday (Columbus Day, Veterans Day, Martin Luther King, Jr. Day, and Memorial Day), an alternate class will be scheduled as a make-up for that class. The make-up class may fall on a Friday. It is the student’s responsibility to take note of when and where classes are offered.
2. How large will my classes be? The average size for a class is about 20 to 25 students; however, larger and smaller classes occur from time to time.
3. How much time will I spend in the lab? Almost half of your technical courses consist of laboratory work. In order for you to get the most out of your laboratory experiences, you will first receive a thorough explanation of the theory behind your lab work.
4. Where do my classes meet? Students should be prepared to attend classes at any of ÌìÃÀӰԺ’s classroom facilities: either at the Post Road, Access Road, or East Greenwich campus.
5. I have not earned my high school diploma or GED: can I enroll in an associate degree program? A candidate for admission to an associate degree program must have a high school diploma, have earned a recognized equivalency diploma (GED), or meet the federal home school requirements.
6. How long should it take me to complete my program? To complete your degree requirements in the shortest possible time, you should take the courses outlined in the prescribed curriculum. For a typical six-term curriculum, a student may complete the requirements in as little as 18 months. To complete all your degree requirements in the shortest time, you should take at least one liberal arts course each term. Students who need more time to complete their curriculum may postpone some of the liberal arts courses until after the completion of the technical requirements. Students are provided up to two additional terms of study to complete the liberal arts requirements without any additional tuition assessment fee. During these additional terms of study, students are required to pay all applicable fees. Students may also elect to complete some of their liberal arts requirements during Intersession, a five-week term scheduled between Spring and Summer Terms. Students will not be assessed any additional tuition for liberal arts courses taken during the Intersession but may be assessed applicable fees. Students wishing to extend the number of terms to complete the required technical courses in their curriculum will be assessed additional tuition and fees. It is in the best interest of students to adhere to the prescribed curriculum without interruption. Students who are not enrolled during one or more terms of their program may find that there is a wait list in place for their program at the time they want to return to ÌìÃÀÓ°Ôº. Students should check with their Student Advisor for further details about wait list procedures.
7. Is ÌìÃÀÓ°Ôº accredited? ÌìÃÀÓ°Ôº is accredited by the ÌìÃÀÓ°Ôº Commission of Higher Education. Accreditation by NECHE is recognized by the federal government and entitles ÌìÃÀÓ°Ôº to participate in federal financial aid programs. Some academic departments have specialized professional accreditations in addition to accreditation by NECHE. For more information on accreditation, see ÌìÃÀӰԺ’s catalog.
8. Can I transfer the credits that I earn at ÌìÃÀÓ°Ôº to another college? The transferability of a course is always up to the institution to which the student is transferring. Students interested in the transferability of their credits should contact the Office of Teaching and Learning for further information.
9. Can I transfer credits earned at another college to ÌìÃÀÓ°Ôº? Transfer credit for appropriate courses taken at an accredited institution will be considered for admission based on the following table and upon receipt of an official transcript:
   

   Courses	Age of Courses	Grade Needed for Transfer to ST
   EN 100 Introduction to College Writing		B- or above
   EN 200 Workplace Communications (or EN 110 Healthcare Communications)		B- or above
   MA 109 Math for Life Sciences		B- or above
   English/Communications Liberal Arts Courses	10 years old	C or above
   Math Course	3 years old	C or above
   Biology Course	3 years old	C+ or above
   Science Course	3 years old	C+ or above
   Major Courses	3 years old	C+ or above

   * For evaluation of previously earned surgical technology credits, an official transcript from the institution(s) and copies of relevant course syllabi and course descriptions must be received. Course syllabi and descriptions are evaluated to determine whether surgical technology course content is similar in content, rigor and credit hours to those in the ÌìÃÀÓ°Ôº curriculum.

   The Office of Teaching and Learning maintains the prerogative to waive these requirements based upon individual review.

   An official transcript from the other institution must be received before the end of the first week of the term for transfer credit to be granted for courses to be taken during that term. Students will receive a tuition reduction for the approved major courses based on the program rate and will be applied against the final major term of the curriculum’s tuition amount. No tuition credit is provided for courses which are not a part of the major curriculum. If the student has a degree from another institution, every opportunity will be reviewed to give the student as many transfer credits as possible for liberal arts courses (math, science, English, humanities, and social sciences) regardless of the age of the degree. Courses in the major will be reviewed individually for relevancy.

10. What is the “Feinstein Enriching America” Program? ÌìÃÀÓ°Ôº Institute of Technology is the proud recipient of a grant from the Feinstein Foundation. To satisfy the terms of the grant, the College has developed a one-credit community enrichment course which includes hands-on community enrichment projects. The course can be taken for a few hours per term, spread over several terms. Students who are already engaged in community enrichment on their own may be able to count that service towards course credit.
11. How many credits do I need to acquire my Financial Aid? In order to be eligible for the maximum financial aid award, you need to maintain at least 12 credits per academic term.
12. What does my program cost? The cost of your program will be as outlined in your enrollment agreement, along with your cost for books and other course materials. Students who decide to take more terms than the enrollment agreement describes to complete the technical courses in their curriculum will be subject to additional fees and possible additional tuition costs. Students who elect to take the technical portion of the degree requirements at a rate faster than the rate prescribed in the curriculum and the enrollment agreement will be assessed additional tuition. Students who require prerequisite courses will incur additional tuition and fees above those outlined in their enrollment agreement. If a student elects to take a course(s) outside of the prescribed curriculum, additional tuition and fees will be assessed. Remember, students who withdraw and re-enter, one time only, pay the tuition rate that was in effect for them at the time of their last day of attendance for up to one year from their last day of attendance. Second re-entrees and beyond pay the tuition rate in effect at the time they re-enter. The most economical way for you to complete your college degree is to begin your program now and continue your studies straight through for the terms necessary to complete your degree requirements.
13. What kind of employment assistance does ÌìÃÀÓ°Ôº offer? The Career Services Office assists ÌìÃÀÓ°Ôº students and graduates in in all aspects of the job search, including resume writing, interviewing skills, and developing a job search strategy. Upon completion of their program, graduates may submit a resume to the Career Services Office to be circulated to employers for employment opportunities in their fields. Employers regularly contact us about our graduates. In addition, our Career Services Office contacts employers to develop job leads. A strong relationship with employers has existed as a result of our training students to meet the needs of industry for over fifty years. No institution can, and ÌìÃÀÓ°Ôº does not guarantee its graduates’ employment or a specific starting salary.
14. Where will job opportunities exist? Graduates have obtained employment in the local area. However, one of the most exciting aspects of this program is the ability to look nationally for employment opportunities.
15. Will this program prepare me for a national certification exam? Yes. The National Board of Surgical Technology and Surgical Assisting (NBSTSA) offers a national certification exam. You must complete the entire course of Surgical Technology study including clinical before you become eligible to sit for this exam. All students must take the certification exam. The Surgical Technology program will assist you in making arrangements for the certification exam.
16. Does this program have a dress code? Yes. Students are required to wear teal green scrubs just like in a “real” surgical setting as well as a white lab coat. You will be provided with the name of the uniform store during your meeting with the admissions officer and the procedure to obtain them. Uniforms are required for all ST lab courses as well as for clinical. Students must wear their uniform for their first class of ST 101. Students are not permitted to have long nails, artificial nails, nail polish, facial and tongue piercings.
17. What is a Surgical Technologist? A Surgical Technologist is an integral member of the surgical team who works closely with surgeons, anesthesiologists, registered nurses, and other surgical personnel delivering patient care and assuming appropriate responsibilities before, during, and after surgery.
18. Who employs Surgical Technologists? A majority of surgical technologists work in hospitals, principally in operating rooms, and occasionally in emergency rooms and other settings that call for knowledge of ability in maintaining asepsis. There are other options for a Surgical Technologist, such as outpatient surgicenters, private employment by physicians or other self-employed technologists. As with many specialized professions, there may be more career opportunities for those who are willing to relocate.
19. What types of tasks are done by a Surgical Technologist? You may be involved in many of the following tasks: Preoperative Duties
    • Prepare the OR by selecting and opening sterile supplies.
    • Assembling, adjusting, checking, and maintaining non-sterile equipment to ensure that it remains in proper working order.
    • Assist in preparing patients for surgery by providing physical and emotional support, checking charts, and observing vital signs.
    • Properly positioning the patient on the OR table.
    • Assist in connecting and applying surgical equipment and/or monitoring devices and prepare the incision site by cleaning, shaving, and disinfecting the skin with an antiseptic solution.
    • Assist the physician with gowning and gloving as well as the application of sterile drapes that isolate the operative site.

     

    Operative Duties

    • Common duties during surgery include operating sterilizers, lights, suction machines, electrosurgical units, and diagnostic equipment.
    • Hold retractors or instruments, sponge or suction the operative site, or cut suture materials as directed by the surgeon.
    • Sterile member of the surgical team who passes instruments, sutures and sponges, needles and instruments before, during, and after surgery.
    • Anticipate the instrumentation needs of the surgeon.
    • Participate jointly in counting sponges, needles and instruments before, during, and after surgery.
    • Connect drains and tubing and receive and prepare specimens for subsequent pathologic analysis.

     

    Postoperative Duties

    • Responsible for preparing and applying sterile dressings following the procedure.
    • Assist in the application of non-sterile dressings, including plaster or synthetic casting materials.
    • Help transfer patients to the recovery room.
    • Clean and stock the operating room for the next operation(s).
20. Will I actually have the opportunity to practice these skills in a real surgical situation while still in school? Yes. The laboratory practicum during the second academic year requires students to actually go to a hospital operating room and experience first-hand the duties which you will someday practice on your own. ÌìÃÀÓ°Ôº’s own surgical suite will serve as the site of your on-campus operating room practice during your first academic year. Operating room laboratories may take place in delivery rooms, hospitals, surgicenters, central supply departments, endoscopy departments, and freestanding operating suites. Students are required to scrub in a minimum of 120 cases in the first and second scrub role as stipulated by the Association of Surgical Technologists (AST) Core Curriculum for Surgical Technology, 6th edition. Students will scrub in general and a variety of surgical specialty procedures.
21. How much time will I spend in the OR while still in school, and how will that course work? Actual hospital OR experience begins in the 4th term at the start of the second academic year. You will be assigned to 1-3 clinical sites where you will build on your acquired skills during 540 contact hours of clinical experience. The ST Clinical Director will assign each student to their clinical placement sites. The university cannot guarantee that placement for internships will be in or near the student’s hometown. Students may be required to commute up to an hour from their home. The university does not provide transportation to internship sites. The university does not reimburse students for traveling expenses (parking, mileage, etc.).
22. If I should experience a disruption in my continuity between my clinical experiences and/or my ST Lab courses, is there a laboratory skill refresher course(s) that might be available to me? ST 98 and/or ST 99 are mandatory courses for students who have had a disruption of continuity in clinical and/or ST Lab courses. They are designed to strengthen and reinforce the lab competency skills necessary to progress into the next term or for entry into clinical placement. The reviews are pass/fail, noncredit clinical preparatory courses. Students mast pass these courses in order to progress into the next term or into clinical. Students who enroll in these courses must have the Department Chairperson’s approval.
23. Where do you go for the Surgical Tech Lab Practicum which requires time in an actual OR? Will that site be provided for me or must I find a site on my own? ÌìÃÀÓ°Ôº is affiliated with many hospitals in the tri-state area of Massachusetts, Rhode Island, and Connecticut. You will be assigned to 1 – 3 sites to complete your experience. It is important to note that hospital practicums will be scheduled for early AM hours (7:00 a.m.) when most surgery is scheduled. The clinical experience is only offered Tuesday through Thursday from 6:45 a.m. to 3:45 p.m. No weekend, late afternoon, or evening clinical time is available. Clinical is three full days.
24. What are the requirements for admission into the Surgical Technology program? All students will complete the Accuplacer Assessment after they enroll with admissions. After completing the Accuplacer Assessment, students will consult with an advisor. If assessment scores meet the criteria on the first attempt for the Surgical Technology program, students will be enrolled directly into the Surgical Technology program. To prepare for the Accuplacer test, it is recommended that students take the Accuplacer Practice Test. The practice test can be found at this website. If students do not meet the admission requirements, they can enroll into the Health Science program. If the students meet the requirements after the first two terms of the Health Science curriculum, the student can transfer into the ST program.If the ST program has a waitlist, the Admissions Department will keep you informed regarding your waitlist status.
25. Do I need to maintain a certain grade point average? Yes, the following academic policies apply for all students in the Surgical Technology program.Department of Surgical Technology Policies
    1. Every student enrolled in the Associate in Science Degree in Surgical Technology (ST) is required to obtain a minimum grade of C+ (77%) for every ST and Biology (BIO) course, and a C (73%) in AHS 102.
    2. A student who receives less than a C+ (77%) in a ST or BIO course cannot advance to the next term.
    3. Students who need to repeat a ST course may be admitted in the next term when the course is offered and space is available.
    4. A student must maintain a cumulative grade point average of at least 2.33 throughout the program. Inability to meet the 2.33 GPA will lead to dismissal.
    5. Students who fail to achieve the above stated grades must meet with the ST Department Chair or the Student Advisor for the ST program to discuss modifications to their class schedule. Failing to achieve a required grade may delay a student’s graduation date. Failure to progress may also have financial implications. Each student is responsible for meeting with Student Accounts and Financial Aid personnel to discuss his or her individual situation.
    6. Surgical Technology students are allowed only one withdrawal from a ST or BIO course during their program of study. Students will be allowed to repeat one ST and one BIO course and must earn a grade C+ (77%) or better to remain in the program.
    7. A student may repeat only one failed (less than C+) ST course over the course of the program. A student who earns less than a C+ in the repeated course or any other ST course will be dismissed from the program.
    8. A student may repeat only one failed (less than 77%) BIO course over the course of the program. A student who earns less than a C+ in the repeated course or any other BIO course will be dismissed from the program.
    9. A student who does not earn at least a C+ (77%) in two ST courses, or at least a C+ (77%) in two BIO courses, or one of each, will be dismissed from the program.
26. Are there any additional costs/activities associated with this program? Besides uniforms and textbooks, a complete physical exam, immunizations, blood work, and other testing at your own expense is required prior to internship experiences in outside facilities. Personal negligence and malpractice insurance is also required by affiliating facilities where internships are scheduled. A course in Cardiopulmonary Resuscitation (CPR) is required some time during the 2nd and 3rd technical terms through the American Heart Association (CPR-C, Healthcare Provider Course). A 3-injection series of immunizations for protection against Hepatitis B is mandatory. Students must also receive positive titer.Ìý There are mandatory Blood Borne Pathogen training modules that a student must take prior to entering the clinical rotation. Please note that some clinical facilities may require drug testing and this will be at the student’s expense. Clinical facilities have the right to deny a clinical placement due to the results of the drug test. The following items, at the student’s expense, are required for this program:
    1. A complete physical examination, immunizations, blood work, and other testing prior to internship experiences in outside facilities.
    1. Personal negligence and malpractice insurance required by affiliating facilities where internships are scheduled.
    2. A course in Cardiopulmonary Resuscitation (CPR), offered through the American Heart Association (CPR-C, Healthcare Provider Course), sometime during the 2nd and 3rd technical terms.
    3. A criminal background check.
    4. The NBSTSA national Certification Technologist exam is required for each student.
    5. A mandatory 3-injection series of immunizations for protection against Hepatitis B, and receipt of a positive titer.
    6. Mandatory training modules on Blood Borne Pathogens prior to entering the clinical rotation.
27. Must I attend classes during the summer 6-week intersession? Yes. Surgical Technology students without transfer credits from another college will need to complete a Humanities/Social Science elective during Summer intersession. Both of these courses are required prior to entering term 4.Terms 1, 2, 3, and intersession (including Humanities and Social Sciences) must be completed in order to enter Term 4 when hospital based clinical experience begins. By contract, affiliating institutions will accept 2nd academic year students. Terms 4 & 5 (including Humanities & Social Sciences) must be completed in order to enter Term 6. Students are eligible to take The National Board of Surgical Technology and Surgical Assisting (NBSTSA) certification exam at the close of Term 6.
28. Are there any behavior standards for this program? ST students are expected to exhibit professional behavior on an ongoing basis. This will be assessed on a continual basis and will not only encompass grades, but also adherence to classroom protocol, laboratory safety, attendance, participation and preparedness for class, appearance, ability to work as a team member, and general professional behavior is required. Clinical placement is dependent on the above.
29. Are there evening classes? Students are able to attend evening liberal arts classes during Terms 1 through 3.
30. Do I need to have a Criminal Background check? All ST students are required to have a national criminal background check. The Joint Commission requires all healthcare facilities which they accredit to perform national criminal background checks on students. Prior to entering fieldwork, students will be required to undergo a criminal background check. It will be necessary for students to sign a Consent and Disclaimer permitting ÌìÃÀÓ°Ôº to perform a criminal background check and a Release and Authorization permitting ÌìÃÀÓ°Ôº to disclose the results of the criminal background check to a clinical site where the student is being considered for placement. Students have an obligation to self-disclose to the Department Chair any criminal convictions or pending criminal federal, state or local charges which occur after a criminal background check has been performed. When they do, the student must undergo an updated background check. If a background check reveals any criminal convictions, the student may be disqualified from a clinical placement or employment in the field. When a student is declined a placement by a site as a result of a positive background check, another attempt will be made to place a student in a clinical site. Students assume the cost for all background checks. Some clinical sites may require drug testing and/or finger printing of students. ÌìÃÀÓ°Ôº makes no guarantee that once a student is matriculated, the student will be able to attend any fieldwork training setting or sit for the national certification if the student has a prior criminal conviction. This is the student’s responsibility to discover what they must do to manage a positive criminal background investigation.
31. Is there an Attendance Policy in the Surgical Technology program? To be successful in the Surgical Technology program, students are expected to attend every lecture and laboratory class in both surgical technology and biology courses. It is essential at the clinical site as well. Data has shown that poor attendance impacts the quality of the student’s work and their success in the program. Professional behaviors such as attendance are an integral part of becoming a surgical technologist. In preparing to become members of the healthcare team, students in the Surgical Technology program must acknowledge how their actions affect others and take responsibility for their own actions. All Surgical Technology faculty value and require active participation in classes, your lateness, leaving early, or absence has negative effects on everyone. Attendance is based on time in class, from beginning to end of each session. Any student missing more than 20% of overall class time in either the Surgical Technology lecture or the Surgical Technology lab will automatically fail the course. There will be no exceptions. Additionally, all work missed due to absence, leaving early, or tardiness, regardless of cause, must be made up to the satisfaction of the instructor. A student who knows that he or she will be absent is expected to call the instructor in advance. The student is responsible for getting assignments from instructors in advance so that the necessary work will be completed before the student leaves or immediately upon his or her return. Speaking to a classmate about what you missed is not a substitute for speaking to your instructor. Students must take responsibility for contacting the instructor regarding class, lab or clinical that was missed. Students should also be aware that quizzes, tests and classroom assignments cannot be made up. Missing a laboratory session does not release the student from his/her responsibility for laboratory content. To meet the accreditation standards for clinical surgical case requirements, students are expected to attend all clinical days. Failure to meet these standards will result in the student’s inability to meet graduation requirements. Any students missing more than 10% of a clinical course will automatically fail the course. There will be no exceptions.
32. Is the COVID-19 vaccination required for the ST program?
    The Surgical Technology (ST) clinical affiliates have different COVID-19 vaccination requirements than the university’s requirements. The clinical affiliates have a responsibility to their employees and patients to minimize the risk of exposure to the COVID-19 virus. Therefore, all clinical affiliates require ST students to provide proof that they have received the COVID-19 vaccination along with one booster. If a student chooses not to be vaccinated the ST program may not be able to assign a student a clinical site. This will prevent the student from completing the program. Clinical sites may have exemptions for their employees; however, most clinical sites do not accept exemptions from students as they are guests at their facility.
    If a clinical site has exemption requirements it is the student’s responsibility to submit any required documents and follow the clinical affiliate’s COVID-19 protocol. It is up to the clinical facility to grant or deny the exemption based on the documentation provided by the student. The university has no control over policies mandated by the clinical affiliates. Students will not know if their exemption is approved by a clinical site until their fourth term.
    If an exemption is granted, individuals may also be asked to complete regular COVID-19 testing, often on a weekly basis. Additional PPE protocols may also be required. The student will assume responsibility for any additional costs associated with the exemption protocols.
    Students may not be able to complete all of the clinical requirements at one clinical site. If a student needs to be assigned more than one clinical site, the student will need to apply for an exemption at each clinical site they are assigned to.
    The failure to comply with the clinical affiliate’s policies with regard to vaccination and/or exemption requirements will result in being dismissed from the ST program.
    In the event the exemption is denied, the ST student will be unable to complete the ST program.

Technical Standards

In addition to the acquisition of the appropriate knowledge in the sciences and humanities, the faculty of the ÌìÃÀÓ°Ôº Institute of Technology Surgical Technology Program have determined that the essential requirements for the successful completion of an Associate Degree in Surgical Technology require that the student possess and be able to demonstrate, with or without reasonable accommodation, the following skills and abilities.

Cognitive Abilities

• Ability to learn, remember and recall detailed information and to integrate it for problem solving.
• Ability to organize or reorganize information presented in curriculum materials and problems.
• Ability to use abstractions in specific concrete situations.
• Ability to break information into its component parts.
• Ability to understand spatial relationships such as differing depths of organs and cavities.
• Ability to comprehend basic mathematic principles and count to 200 in English.
• Ability to perform tasks learned by demonstrations.
• Ability to perform tasks following verbal instructions.

Communications Skills

• Ability to communicate effectively with faculty, patients, physicians and other hospital staff.
• Ability to read English sufficiently to comprehend college level text books, a physician’s preference card, medication labels, package directions and patient charts.
• Ability to write English sufficiently to record legibly information contained in course assignments, a physician’s preference card and label medications.
• Ability to demonstrate and use the knowledge acquired during the classroom training process and in the clinical setting to identify appropriately, pertinent patient information and transmit the information, promptly, effectively, efficiently and sensitively to appropriate personnel even when the time span available for communication is limited.
• Ability to express verbally, clearly and distinctly to enunciate, medical and surgical terminology even while wearing a face mask.
• Ability to express thoughts clearly.

Adaptive Ability.

• Ability to maintain emotional stability and to have the maturity necessary to interact with other members of the faculty, students and surgical team in a professional manner.
• Ability to make decisions appropriate to the care of patients under stressful and demanding conditions.
• Ability to follow instructions and complete tasks under stressful and demanding conditions.
• Ability to adapt in a positive manner to new and changing situations with an open mind and with flexibility.
• Ability to work in an environment which may change rapidly in unpredictable ways, without warning.
• Ability to think clearly and act quickly and appropriately in an emergency situation.

Physical Ability

• Ability to stand and perform extensive walking for 4-6 hours at a time with no breaks.
• Ability to sit for 4-6 hours at a time with no breaks.
• Sufficient strength to perform CPR (Cardiopulmonary Resuscitation) on both adult and pediatric patients.
• Sufficient upper body strength great enough to carry 50 pounds.
• Sufficient strength and agility to lift equipment, push stretchers and beds, and move large pieces of equipment.
• Sufficient strength and agility to grasp and maintain tension for long periods of time on tissues and bones using stainless steel retractors (some awkwardly shaped) and other operating room equipment.
• Sufficient strength to assist with positioning patients for and during surgery (e.g.: holding and lifting extremities in varying positions for surgical preparation and x-ray).
• Ability to wear and tolerate surgical masks and surgical gloves and other protective equipment including lead aprons.
• Ability to perform learned skills, independently, with accuracy and completeness within relatively short time frames in accordance with operating room procedure.
• Ability to perform exposure-prone procedures in accordance with recommendations set forth by the Center for Disease Control (CDC)*.
• Ability to work in an environment where there are latex/latex-based products, and latex airborne particles such as dust and powder.

Manual Ability

• Sufficient manual dexterity and mobility to move stretchers, carts and equipment independently.
• Sufficient motor function and sensory abilities to participate effectively in the classroom laboratory and clinical setting.
• Sufficient manual dexterity and motor coordination to coordinate hands, eyes and fingers in the operation of medical and other equipment and surgical instruments.
• Sufficient fine motor control to manipulate microsurgical instruments.
• Ability to grasp, lift and carry instrument trays and various items of equipment.
• Agile enough to handle surgical instruments with both left and right hands at an extremely rapid pace.
• Ability to supinate and pronate at the wrist.

*The CDC recommends that Health Care Workers (HCW’s) who are infected with AIDS (HIV) or Hepatitis B Virus (HBV) (and are Hepatitis B Antigen [HbeAg] positive) should not perform exposure-prone procedures unless they have sought counsel from an expert review panel and been advised under what circumstances, if any, they may continue to perform these procedures.

Sensory Ability

• Visual
  • Visual ability, with or without correction, acute enough to differentiate surgical instruments, human anatomy and changes in the anatomy that occur during a surgical procedure.
  • Visual ability, with or without correction, acute enough to read small printed labels on medications
  • Visual ability, with or without correction, acute enough to read small numbers on instruments, implants and guides.
  • Visual ability, with or without correction, acute enough to handle extremely fine suture material.
  • Must have visual acuity corrected to 20/20 and visual perception with respect to color.
  • Must be able to interpret reactions on slides, and test tubes, and visually identify cellular components and microorganisms under a microscope.
  • Must be able to properly identify surgical sutures, medication labels, and other surgical supplies that are color coded.
  • Must be able to view images for accuracy, view computer screens for extended periods, and participate in surgical procedures in dim light.
• Auditory
  • Auditory ability, with or without correction, acute enough to hear and understand words spoken by staff and physicians in an environment with a high level of noise in the background (such as, but not limited to: saws, drills, anesthesia equipment, radios, lasers, etc.) when muffled by protective equipment. Individuals with auditory processing disorder will not have the visual cues needed to assist in processing the spoken word.

Uniform Policy

Please obtain your uniforms as soon as possible.

All scrubs must be teal blue solid color. Uniforms are to be worn during ST Lab classes and to Clinical. Please do not purchase any style or color.

1. Pants (drawstring or elastic waist)
2. V-neck top
3. Lab Coat: Long white lab coat, to your knees; your choice of styles, but must be all white.
4. Shoes: Fluid resistant shoes. No clogs, backless or shoes with nylon or canvas inserts.

Students may purchase items for their uniforms online at Alexander’s Uniforms . At the site’s homepage, click “ÌìÃÀÓ°Ôº Institute of Technology” from either the icon or the left tab, then select your department from the list. All items are priced to include a 15% discount. If you have any questions, contact Wendy Magnette via email at [email protected] or at 401-654-6500.

Ìý

You may also purchase your uniform items at Alexander’s Uniforms at one of their three locations (recommended if you are unsure of the size): 1) Rhode Island: Marshall’s Plaza, 1 Lambert Lind Highway, Warwick RI 02886, 860-889-7744, 401-654-6500; 2) Connecticut: 77 Salem Turnpike, Norwich, CT 06360, 781-762-1449; 3) Massachusetts: 500 Providence Highway, Norwood MA 02062. A Student ID is needed to ensure you receive your 15% discount at checkout.